Pike’s Peak - Fragrance Oil
MWFC ORIGINAL FRAGRANCE
An adventurous blend of aromatic mountain air. Fresh sage and cool eucalyptus are highlighted with hints of cinnamon, complex tonka and rounded out with smoke embers.
Top notes: Citrus, Cinnamon, Eucalyptus
Middle notes: Blue Sage, Amber, Tonka
Base notes: Cedarwood, Smoke Embers
Maximum Usage Rates
Max use in soap: 4.05%
Max use in lotion: Please view IFRA
Recommended Usage in Wax: 1-1.5oz/lb (please look at your specific wax to see their recommendations and test)
Ethyl Vanillin: 3.20%
Prop 65 Compliant: YES
Contains Essential Oils: Juniperus Oil, Cinnamon Oil, Orange Oil, Bergamot Oil
Oil Color: Colorless to Very Pale Yellow
It is the responsibility of the customer to ensure the safety of the finished product containing this fragrance by conducting all necessary tests.
All products are filled by weight not volume. Fill lines may vary.
In-house tested in 100% soy wax, further testing required for your own product line.
Avoid direct contact with skin.
Disclaimer: The maximum usage rates listed are the ABSOLUTE maximum allowed % to be in compliance with IFRA standards. These are not suggested usage rates to be used in your products. Typical usage rates are much lower than these values. It is up to you to determine how much % will be needed for your specific product through your own testing process.
Cold Process Soap Testing Notes
Tested at MAX (4.05%) FO load, 5/28/22 with a recipe containing 30% lye concentration (water:lye ratio 2.300:1) with 5% superfat at 90 degrees. Recipe is 33% organic and sustainable palm oil, 33% coconut oil, 16% Canola oil, 14.9% olive oil, 3% castor oil, and 0.01% vitamin E oil.
Discoloration: Light Tan
Design Notes: Soaps very well. Stays fluid for a long time, allowing for intricate, complex designs, swirl designs, or a wood grain technique. May need additional time before unmolding.
Scent Retention: Strong
Disclaimer: Test results are intended to be used as a guideline. Results may vary based on individual recipes.